The addition of Tie Finder Technology results in a machine with intelligent automatic indexing, thereby increasing productivity while reducing operator fatigue. The marriage of probes designed to detect the location of either wood or concrete ties with a machine’s previously existing automatic cycle allows for fully automatic work.
Tie Finding can be added as a factory option or as a field kit to any Harsco Rail tamper featuring the Jupiter II Control System.
The optional Line Lite Lining System can line through curves without pre-plotting and provides “best fit” of curves with the ability to easily adjust the fits.
The System V Lining System main or work screen is composed of several panels, which are continuously updated as the machine operates. Each panel is devoted to a particular function or group of functions, which are listed in the chart.
The System V Lining System is based on pre-plotting of the curve either by the tamper and utilization of this alignment data to program the correction of the track prior to performing this correction. The current position of the track, the corrected alignment, the anticipated “throws” of the track, the time, data, and track position can be plotted on board the machine or viewed on the operator’s display screen. The machine control processor will perform an analysis of this curve data and generate a best correction of the curve for consideration. If not acceptable, this can be manually modified by “rubber banding” to the desired position. The graphic output of the system, using colors, highlights the various on-screen information.
A fully enclosed, rear entry, sound suppressed, and fully insulated cab. It is mounted on air bags accessible from either side of the machine via a rear platform, equipped with conventional stair type steps. The air bag feature provides excellent ride comfort for the operator and added protection for electronic components. The operator has an unobstructed view of the work area, and all machine operation and safety lock controls are within comfortable reach. Front and rear wipers and dual tone air horn included.
A solid-state removable USB flash drive can be used with the machine for the transfer of track recordings and production reporting data. Curves that have been recorded may be transferred to this device and subsequently read by an IBM compatible PC equipped with the optional System V Lining System office version (USB port required). The alignment of curves may be viewed in the office environment, modified or engineered as desired, saved to removable flash drive, and returned to the machine for use. Upon insertion of the USB flash drive, curve data files transfer automatically, updating the information both on the machine and on the removable device.
Enviri Corporation | All Rights Reserved | © 2024 | Website by Blittzed!
